Языки, на которых мы говорим: [Darya] [Yu Long] [Amir] [Anh] [Mais] [Darya] Контакты
Стать соавтором готовой статьи | Продать свою статью Перейти к актуальным темам
На этой странице Вы можете выбрать статью по своему направлению и стать одним из соавторов. Ниже информация о каждой публикации. Справа информация о стоимости, журнале, сроках подачи и сроках публикации. Слева краткое описание статьи и ключевые слова. Если в списке, на этой странице, Вы нашли подходящую статью, укажите её номер # (Номер заказа) и укажите под каким номером по порядку в списке авторов Вы хотите быть. Если у Вас есть срочные вопросы или Вы не разобрались как пользоваться сайтом, позвоните в WhatsApp / Viber / по телефону / напишите на почту. Все контакты указаны возле каждой темы.
Объединяем авторов и гарантируем публикацию Scopus и Web of Science
Вы можете присоединиться к коллективу авторов, статьи которых уже
приняты в журнал, оплатив часть стоимости публикации.
При желании, Вы можете внести собственные правки в статью.

Купим дорого хорошие статьи
Если Вы пишите и публикуете собственные статьи в журналах Scopus и Web of Science
мы найдём Вам соавторов и хорошо заплатим за публикацию.
Если Вы оплатили публикацию на сайте, пришлите квитанцию менеджеру на WhatsApp, Viber или e-mail

Текущие договоры


#31Август 2020 выход журнала
Набор в журнал до 05-07-2019
328000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли13202010988087740
№ 31.1№ 31.2№ 31.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 21; 18;
Sjr: 0,197;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q4;
IF: 0.393;
CiteScore: 602;
Science Citation Index Expanded;
Специализация журнала:
Fuel Technology; Chemical Engineering (all); Chemistry (all); Energy Engineering and Power Technology;
Engineering, Petroleum; Energy + Fuels; Engineering, Chemical;
В статье рассмотрены такие вопросы:
Derivatives of 2,5-Dimercapto-1,3,4-Thiadiazole as Multifunctional Lubricant Additives
1 место - продано (договор 311)
2 место - продано (договор 312)
3 место - продано (договор 313)

Дополнительно по статье:
Research on additives is important for many oil companies today. The rapidly growing market for lubricants has led to efforts to improve such materials through the development of new compositions. In the past decade, a strategic goal of the Russian oil refining industry has been to develop domestically-produced additives, compositions, and additive packages. In this article, trends are discussed on the development of promising products derived from a compound used in the synthesis of multifunctional additives.
Ключевые слова:
2,5-dimercapto-1,3,4-thiadiazole; lubricant; multifunctional additives


Заказать публикацию № 31

Номер заказа № 31

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#32Октябрь 2020 выход журнала
Набор в журнал до 15-09-2019
205000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли426403936036080328002952026240
№ 32.1№ 32.2№ 32.3№ 32.4№ 32.5№ 32.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,9;
Percentile 18; 16; 15;
Sjr: 0,222;

Специализация журнала:
Materials Chemistry; Mechanics of Materials; Ceramics and Composites;

В статье рассмотрены такие вопросы:
Glass Formation and Crystallization in Strontium-Aluminum-Silicate Glass: Influence of Modifying Additives on Melting and Crystallization
1 место - продано (договор 321)
2 место - продано (договор 322)
3 место - продано (договор 323)
4 место - продано (договор 324)
5 место - продано (договор 325)
6 место - продано (договор 326)

Дополнительно по статье:
The influence of calcium fluoride, zinc oxide, and boron oxide as modifying additives on the melting and crystallization properties of strontium aluminosilicate glasses is examined. The influence of the type and amount of the modifying additive on the homogeneity of the molten glass and the quality of glass castings was evaluated visually. Bulk crystallization and XRD were used to study the effect of additives on the formation of the crystalline structure of the glasses.
Ключевые слова:
crystal growth; crystallization; heat treatment; nucleation; sitall [glass-ceramic]; SrO?Al2O3?SiO2; strontium anorthite


Заказать публикацию № 32

Номер заказа № 32

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#33Август 2020 выход журнала
Набор в журнал до 25-07-2019
205000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли820006888054940
№ 33.1№ 33.2№ 33.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,9;
Percentile 18; 16; 15;
Sjr: 0,222;

Специализация журнала:
Materials Chemistry; Mechanics of Materials; Ceramics and Composites;

В статье рассмотрены такие вопросы:
Influence of Mineral Additives on the Structure and Properties of Heat-Insulating Materials Based on Silica-Containing Raw Material
1 место - продано (договор 331)
2 место - продано (договор 332)
3 место - продано (договор 333)

Дополнительно по статье:
The process of obtaining plate heat-insulating foam-silicate materials based on the by-products of the processing of apatite-nepheline ores by means of a low-temperature technology is analyzed. Methods are proposed for improving the performance metrics of foamed materials by introducing mineral additives. In terms of a combination of properties, the most effective additives are the tailings of vermiculite ores and diopside. The technical metrics of the developed foam silicates are: density 0.38 ? 0.51 g/cm3, strength to 6 MPa, thermal conductivity 0.09 ? 0.107 W/(m ? K), and comparatively low water absorption.
Ключевые слова:
foam silicates; heat-insulating materials; mineral additives; technogenic waste


Заказать публикацию № 33

Номер заказа № 33

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#34Декабрь 2020 выход журнала
Набор в журнал до 10-11-2019
287000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли1148009594077080
№ 34.1№ 34.2№ 34.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1;
CiteScore: 9,9;
Percentile 99; 98; 97; 95; 92;
Sjr: 1,647;

Специализация журнала:
Mathematical Physics; Mathematics (all); Applied Mathematics; Statistical and Nonlinear Physics; Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
Discrimination information for intensity distributions of a collimated wave beam
1 место - продано (договор 341)
2 место - продано (договор 342)
3 место - продано (договор 343)

Дополнительно по статье:
The results of a nonlinear thermodynamic analysis of the process of refractive distortions of a collimated wave beam profile at the optical path output are presented. The formalism of q-deformed entropy functionals is used, which makes it possible to describe both extensive additive systems and nonextensive systems for which the entropy superposition principle or internal energy is not implemented. Non-extensive thermodynamic systems should be considered as a class of nonlinear systems for which deviation from the Boltzmann?Shannon?Gibbs axiomatics is associated with the structure of the phase space, the presence of predetermined space-time correlations that determine the nonlocality of interactions admissible in the system. A method of discrimination information maps for various types of q-deformed entropies, a method of marginal projections of the first and second spatial moments for the video sequences series of the wave beam intensity profile are proposed. The values of the spatio-temporal correlations of the process, the stationarity time of the dispersion properties of the mappings are obtained. Similar properties are inherent in complex nonextensive systems and lead to nonlinear responses when creating multicomponent systems.
Ключевые слова:
Intensity distribution; Marginal projections of information maps; Non-additive processes; Non-extensive systems; Nonlinear thermodynamics; q-deformed discrimination information; q-deformed entropy


Заказать публикацию № 34

Номер заказа № 34

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#35Май 2021 выход журнала
Набор в журнал до 20-06-2020
410000 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли10086091840820007298063960
№ 35.1№ 35.2№ 35.3№ 35.4№ 35.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 2;
CiteScore: 2,9;
Percentile 56; 52;
Sjr: 0,459;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q3;
IF: 1.952;
CiteScore: 677;
Science Citation Index Expanded;
Специализация журнала:
Mechanical Engineering; Civil and Structural Engineering;
Water Resources; Engineering, Civil;
В статье рассмотрены такие вопросы:
Study Effect of Antiturbulence Additives on Hydraulic Efficiency in Oil Pipelines by Disk Turborheometer
1 место - продано (договор 351)
2 место - продано (договор 352)
3 место - продано (договор 353)
4 место - продано (договор 354)
5 место - продано (договор 355)

Дополнительно по статье:
To determine the efficiency of additives Necadd-447, M-FLOWTREAT, FLO-XL, and FLO-MXA, a method for conducting experiments and processing the obtained results is proposed in this paper. The hydraulic efficiency for all additives is found to be within the Reynolds number range of 140,000-240,000; the efficiency is maximum for Reynolds numbers of 600,000 to 700,000. Increase in additive concentration to 20-40 ppm increases hydraulic efficiency. Any further increase in concentration decreases effectiveness; this is due to turbulent behavior in the flow induced by a rotating disk and the attenuation of the Toms effect caused by an increase in the intermolecular interaction of polymer tangles. The highest hydraulic efficiency is observed at Reynolds numbers between 500,000 and 700,000. An empirical dependence is proposed to predict the effectiveness of antiturbulence additives in oil and petroleum products in trunk pipelines.


Заказать публикацию № 35

Номер заказа № 35

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#36Март 2021 выход журнала
Набор в журнал до 25-04-2020
369000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли14760012300098400
№ 36.1№ 36.2№ 36.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1; 2;
CiteScore: 6,9;
Percentile 85; 83; 82; 80; 71;
Sjr: 0,64;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q1;
IF: 3.599;
CiteScore: 23.070;
Science Citation Index Expanded;
Специализация журнала:
Condensed Matter Physics; Atomic and Molecular Physics, and Optics; Biophysics; Chemistry (all); Biochemistry;
Optics;
В статье рассмотрены такие вопросы:
Optical properties of polyvalent iron ions and anti-site defects in transparent MgAl2O4 ceramics
1 место - продано (договор 361)
2 место - продано (договор 362)
3 место - продано (договор 363)

Дополнительно по статье:
Solid-phase synthesis of optical ceramics MgAl2O4 with various concentrations of iron as an impurity element was carried out without using sintering additives. Ceramics were characterized by intense absorption in the UV spectral region due to both intrinsic F-type defects and intrinsic iron ions. The effect of nonradiative energy transfer from optically active centers of the F-type to the impurity Fe3+ ion was observed. In ceramic samples with an iron concentration more than 0.4 mol%, the decrease in the intensity of the Fe3+ luminescent signal (coordination number, Z = 6) is due to the effect of concentration quenching, as well as the conversion of Fe3+ Fe2+ ions. It was shown that, as a result of high-temperature synthesis, optically active centers of Fe3+ and Fe2+ are formed, which are localized in regular (octahedral and tetrahedral) lattice sites and defect anti-sites. According to the data of optical absorption spectroscopy, as the content of iron ions increases, the concentration of Fe2+ (Z = 6) increases. A new luminescence band with a maximum at 2.3 eV was detected by photoluminescence spectroscopy, presumably associated with the luminescence of Fe3+ in tetrahedral lattice sites (Z = 4).
Ключевые слова:
Anti-site defects; Iron ions; Luminescence; MgAl2O4 spinel; Optical absorption; Transparent ceramics


Заказать публикацию № 36

Номер заказа № 36

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#37Октябрь 2020 выход журнала
Набор в журнал до 25-09-2019
287000 руб7 чел. (авторов) в этой статье

Соавтор1234567
проданопроданопроданопроданопроданопроданопродано
Рубли51660483804510041820377203444031160
№ 37.1№ 37.2№ 37.3№ 37.4№ 37.5№ 37.6№ 37.7
ДоговорДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1;
CiteScore: 7,8;
Percentile 90; 88; 87; 82;
Sjr: 0,994;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q1; Q2;
IF: 3.871;
CiteScore: 9.009;
Science Citation Index Expanded;
Специализация журнала:
Metals and Alloys; Mechanical Engineering; Mechanics of Materials; Materials Chemistry; Ceramics and Composites;
Metallurgy + Metallurgical Engineering; Materials Science, Multidisciplinary;
В статье рассмотрены такие вопросы:
Mechanical and microstructural characterization of WC-Co consolidated by binder jetting additive manufacturing
1 место - продано (договор 371)
2 место - продано (договор 372)
3 место - продано (договор 373)
4 место - продано (договор 374)
5 место - продано (договор 375)
6 место - продано (договор 376)
7 место - продано (договор 377)

Дополнительно по статье:
A study was carried out to investigate the influence of the initial powder features on the microstructure, the phase composition, and on the mechanical properties of WC-12%Co samples produced by binder jetting and densified by sintering in vacuum at 1400 ?C and by sinter-HIPing. The initial powder consisted of a mixture of fine-grained and coarse-grained WC-based particles, and W2C-based ones. The density of the printed samples was 97.4% and 99.3% after sintering and sinter-HIPing, respectively. Layer-oriented porosity was observed only in sintered samples. The microstructure of the samples consisted of a mixture of fine and coarse WC grains, which can be the result of the coalescence of grains from anomalous coarse grains in the powder particles. Vickers hardness and transverse rupture strength of sinter-HIPed samples are 1205 HV and 2257 MPa, respectively, which is coherent with the microstructural analysis and close to coarse-grained commercial products.
Ключевые слова:
Additive manufacturing; Binder jetting; Cemented carbides; Microstructure; WC-Co


Заказать публикацию № 37

Номер заказа № 37

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#38Август 2020 выход журнала
Набор в журнал до 25-07-2019
246000 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли6068054940492004428038540
№ 38.1№ 38.2№ 38.3№ 38.4№ 38.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 2;
CiteScore: 3,3;
Percentile 54; 53; 51;
Sjr: 0,389;

Специализация журнала:
Chemical Engineering (all); Materials Chemistry; Polymers and Plastics;

В статье рассмотрены такие вопросы:
Radical polymerization of methyl methacrylate in the presence of methylene blue and organobromides under visible light irradiation
1 место - продано (договор 381)
2 место - продано (договор 382)
3 место - продано (договор 383)
4 место - продано (договор 384)
5 место - продано (договор 385)

Дополнительно по статье:
The visible light-induced polymerization of methyl methacrylate in the presence of methylene blue as a photocatalyst and various bromine-containing organic compounds was first investigated. It was shown that polymerization may be successfully initiated even at low concentrations of methylene blue using conventional LED strips. The polymerization rate and the dependency of molecular weight parameters of the samples on monomer conversion are governed by the nature of light source as well as the structure of the initiator and introducing additional reagents. The use of warm white light seems to be more favorable for conducting the process to high conversions. Electron-donating additives such as aliphatic amines or formic acid accelerate the polymerization and determine the linear increase of molecular weight of the samples with the conversion growth typical for reversible deactivated radical polymerization. The performed quantum-chemical calculations and experimental studies show that the simultaneous realization of the metal-free atom transfer radical polymerization and light-induced stable free radical polymerization mechanisms is possible under the light irradiation. The simultaneous realization of two different processes determines the linear growth of the polymer chain upon conversion but results in average control over molecular weight distribution of the obtained samples.
Ключевые слова:
Metal free atom transfer radical polymerization; Methyl methacrylate; Methylene blue; Phenothiazine; Photopolymerization


Заказать публикацию № 38

Номер заказа № 38

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#39Июнь 2021 выход журнала
Набор в журнал до 15-07-2020
205000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли62320549404838041000
№ 39.1№ 39.2№ 39.3№ 39.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3;
CiteScore: 1,6;
Percentile 32; 31; 27;
Sjr: 0,31;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q2; Q3;
IF: 2;
CiteScore: 1.292;
Science Citation Index Expanded;
Специализация журнала:
Materials Chemistry; Polymers and Plastics; Ceramics and Composites;
Materials Science, Characterization + Testing; Materials Science, Composites; Polymer Science;
В статье рассмотрены такие вопросы:
Processing method, properties and application of functionally graded polymer materials based on the mixtures of poorly compatible epoxy resins
1 место - продано (договор 391)
2 место - продано (договор 392)
3 место - продано (договор 393)
4 место - продано (договор 394)

Дополнительно по статье:
In this study, the method of manufacturing of functionally graded polymer materials based on the mixtures of poorly compatible epoxy resins is suggested. A novel processing method allowing to control the filler distribution across the section of graded materials depending on the operating conditions was developed. The essence of the method is self-settling of the blend consisting of two liquid epoxy resins with different viscosities and densities. Depending on mixing and injecting order the functional additive having antifriction, anti-adhesive or heat-protective properties can be distributed either homogenously or nonuniformly. In the latter case after curing the functionally graded material can be produced. Based on the formulations of poorly compatible phenol novolac epoxy resin NPPN-638 and active diluent triglycidyl phosphate (TGP), new functionally graded polymer materials with continuous change of composition and properties were developed. The functional additive (graphite, glass microspheres, polytetrafluoroethylene powder) concentrates in the top layer of the self-settled epoxy mixture while the bottom layer is enriched by TGP which possess advantaged adhesion to various substrates. As a result, antifriction, anti-adhesive, heat-protective and intumescent flame retardant coatings with improved performance were obtained.
Ключевые слова:
coatings; compatibility; epoxy resin; Functionally graded polymer; thermosetting resins


Заказать публикацию № 39

Номер заказа № 39

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#40Декабрь 2020 выход журнала
Набор в журнал до 05-11-2019
410000 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли10086091840820007298063960
№ 40.1№ 40.2№ 40.3№ 40.4№ 40.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 2; 3;
CiteScore: 5,5;
Percentile 73; 44;
Sjr: 0,735;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q2; Q3;
IF: 2.91;
CiteScore: 7.459;
Science Citation Index Expanded;
Специализация журнала:
Chemistry (all); Catalysis;
Chemistry, Applied; Chemistry, Physical;
В статье рассмотрены такие вопросы:
Charge Carriers in Commercial Photocatalysts: Fractal Kinetics and Effect of ?Inert? Additives
1 место - продано (договор 401)
2 место - продано (договор 402)
3 место - продано (договор 403)
4 место - продано (договор 404)
5 место - продано (договор 405)

Дополнительно по статье:
High photon conversion efficiencies and low-cost materials are crucial for implementing photocatalytic solutions in large scale applications. To improve the conversion efficiencies, knowledge on the lifetime and dynamics of photogenerated charge carriers is fundamental, for which transient absorption spectroscopy has provided important insights. Regarding the cost of the materials, one approach to decrease it is mixing the photocatalyst with cheaper additives while avoiding a significant loss in its activity. In this short review we summarize the findings of our group dealing with both aspects. A new model to fit transient absorption decays, based on fractal kinetics, is discussed. The model has been applied to the transient decays of TiO2 mixtures with binary particle size distributions and of TiO2 mixtures with a priori inert additives. In both cases, the insights obtained from the model were crucial to explain the photocatalytic activities of the mixtures.
Ключевые слова:
Fractal kinetics; Photocatalysis; Titanium dioxide; Transient absorption spectroscopy


Заказать публикацию № 40

Номер заказа № 40

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#41Август 2020 выход журнала
Набор в журнал до 25-07-2019
410000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли852807872072160656005904052480
№ 41.1№ 41.2№ 41.3№ 41.4№ 41.5№ 41.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1;
CiteScore: 5,9;
Percentile 77; 76;
Sjr: 0,667;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q2;
IF: 3.361;
CiteScore: 187.116;
Science Citation Index Expanded;
Специализация журнала:
Chemical Engineering (all); Chemistry (all);
Chemistry, Multidisciplinary;
В статье рассмотрены такие вопросы:
Concentrating rare earth elements in brown coal humic acids by mechanochemical treatment
1 место - продано (договор 411)
2 место - продано (договор 412)
3 место - продано (договор 413)
4 место - продано (договор 414)
5 место - продано (договор 415)
6 место - продано (договор 416)

Дополнительно по статье:
Coals are now viewed as a promising source of rare earth elements increasingly often. Rare earth elements (REE) are known to occur both in the organic and mineral components of brown coals. This study aims at investigating the applicability of mechanochemical activation for concentrating rare earth elements (including Sc, Y, La and lanthanides) in different brown coal fractions. Mechanochemical activation of brown coal in the absence of reagents, as well as additives of sodium percarbonate, monosodium phosphate, and sodium chloride, was carried out. Mechanochemical activation does not cause degradation of humic acid-REE complexes contained in pristine coal. The REE concentration process in the samples of mechanochemically activated coal can be attributed both to formation of new oxygen-containing groups in humic acids (HA) and to binding of REEs to oxygen-containing groups already contained in coal due to vigorous solid-phase mechanical mixing. A method for mechanochemical activation of coal, which allows one to transfer up to 93 ? 7% REEs into the organic alkali-soluble fraction-the HA fraction (while HA in the pristine coal contain only 38 ? 3% REE)-has been developed. The estimated total concentration of REEs in pristine coal ash is 8000 ppm. The estimated REE content in the ash of the product (HA fraction) is as high as 17300 ppm. Concentrations of Ce, Nd and Y in the ash of the product are 6000 ppm, 4200 ppm and 2500 ppm, respectively.


Заказать публикацию № 41

Номер заказа № 41

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#42Февраль 2021 выход журнала
Набор в журнал до 15-03-2020
369000 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли9020082000738006560057400
№ 42.1№ 42.2№ 42.3№ 42.4№ 42.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1;
CiteScore: 6,3;
Percentile 84; 76;
Sjr: 0,899;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q1; Q2;
IF: 3.676;
CiteScore: 123.699;
Science Citation Index Expanded;
Специализация журнала:
Physics and Astronomy (all); Physical and Theoretical Chemistry;
Physics, Atomic, Molecular + Chemical; Chemistry, Physical;
В статье рассмотрены такие вопросы:
Effect of water on the behaviour of lithium and superoxide ions in aprotic solvents
1 место - продано (договор 421)
2 место - продано (договор 422)
3 место - продано (договор 423)
4 место - продано (договор 424)
5 место - продано (договор 425)

Дополнительно по статье:
An aprotic lithium-air battery is a promising candidate for next-generation energy storage systems, but its practical performance is still low. The addition of water to an electrolyte can substantially increase the capacity and round-trip efficiency of batteries. However, fundamental mechanisms of the water impact are still far from being fully understood. To contribute to this issue, we studied by molecular dynamics simulations the effect of water additives on the behaviour of discharge intermediates Li+and O2in two frequently used solvents: dimethoxyethane (DME) and dimethyl sulfoxide (DMSO). We have estimated the structures of the solvation shells around Li+and O2ions, and the residence times of various electrolyte components inside the solvation shells depending on the concentration of water additives. Furthermore, we have estimated the rate and the equilibrium of the Li+and O2association. Our results reveal that water additives in electrolytes shift the equilibrium of the association reaction toward soluble Li+and O2ions in both DME and DMSO. These data argue for the view that water promotes the solution discharge mechanism, thus increasing the capacity. Moreover, we show that water accelerates the kinetics of the association reaction due to the decrease of the stability of Li+and O2solvation shells. This may explain the reduced discharge overpotential when water is added.


Заказать публикацию № 42

Номер заказа № 42

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#43Ноябрь 2020 выход журнала
Набор в журнал до 25-10-2019
164000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли49200442803854032800
№ 43.1№ 43.2№ 43.3№ 43.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
PID regulator of the automated system for the production of nanostructure concentrates
1 место - продано (договор 431)
2 место - продано (договор 432)
3 место - продано (договор 433)
4 место - продано (договор 434)

Дополнительно по статье:
The article presents a description of the cost-effective software package Control system for the production of nanostructures containing silicon dioxide and carbon. The presented concentrates are a by-product of the production of silicon and high-silicon ferroalloys and are actively used in construction. The proposed system makes it possible to increase the purity and activity of the developed additives, which allows achieving high properties (frost resistance, water resistance, durability) during the construction of roads and bridge structures, which is undoubtedly important. Test methods and procedures are defined during test case development. The purpose of test case development is to establish the structure of specific test suites and to define procedures for conducting appropriate proficiency testing. The use of this set of tests ensures the comparability and recognition of the reports on the performed tests (testing) and thereby minimizes the need for certification testing for the co-production of nanostructures containing silicon dioxide and carbon.


Заказать публикацию № 43

Номер заказа № 43

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#44Ноябрь 2020 выход журнала
Набор в журнал до 25-10-2019
123000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли36900328002870024600
№ 44.1№ 44.2№ 44.3№ 44.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
Development of an emergency stop system for the software complex for the production of modifying additives
1 место - продано (договор 441)
2 место - продано (договор 442)
3 место - продано (договор 443)
4 место - продано (договор 444)

Дополнительно по статье:
The article presents the results of the development of an emergency stop system for the software complex for the automated production of modifying additives for bridge structures in the Arctic zone. Modifiers obtained by the production process, containing silicon dioxide and carbon, are often used as additives for various special concretes. The developed system ensures high purity, reliability of production and reduces its cost. The purpose, input and output data are described, a block diagram of the emergency stop algorithm of the automation system of the process control of the production of modifying additives for bridge structures based on nanostructures of carbon and silicon dioxide is developed. The test case data provide control over the completeness and correctness of the calculations and generated databases. It is also worth noting that the associated production of construction modifiers has a positive effect on their cost and the availability of development of construction technologies in the Arctic zone.


Заказать публикацию № 44

Номер заказа № 44

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#45Январь 2021 выход журнала
Набор в журнал до 20-02-2020
123000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли254202378022140196801804016400
№ 45.1№ 45.2№ 45.3№ 45.4№ 45.5№ 45.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
Structural-parametric identification of the sum of hyperbolic functions with additive noise
1 место - продано (договор 451)
2 место - продано (договор 452)
3 место - продано (договор 453)
4 место - продано (договор 454)
5 место - продано (договор 455)
6 место - продано (договор 456)

Дополнительно по статье:
The paper proposes a two-step method for structural-parametric identification of hyperbolic functions with additive noise. At the first stage, a linear difference equation is associated with the sum of hyperbolic functions. For the estimation of the parameters of the difference equation, the method of generalized total least squares (GTLS). To solve the GTLS problem, an augmented system equivalent to a biased normal system is applied. In the second stage, the missing parameters are estimated. The simulation results showed that the use of GTLS in the first stage improves the accuracy of the estimate compared to Ordinary Least Squares (OLS).


Заказать публикацию № 45

Номер заказа № 45

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#46Сентябрь 2020 выход журнала
Набор в журнал до 05-08-2019
328000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли680606314057400524804756041820
№ 46.1№ 46.2№ 46.3№ 46.4№ 46.5№ 46.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1;
CiteScore: 13,4;
Percentile 98; 97; 96; 94; 93; 90;
Sjr: 2,041;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q1;
IF: 7.147;
CiteScore: 103.367;
Science Citation Index Expanded;
Специализация журнала:
Modeling and Simulation; Civil and Structural Engineering; Management, Monitoring, Policy and Law; Mechanical Engineering; Building and Construction; Industrial and Manufacturing Engineering; Electrical and Electronic Engineering; Fuel Technology; Energy Engineering and Power Technology; Pollution; Energy (all); Renewable Energy, Sustainability and the Environment;
Thermodynamics; Energy + Fuels;
В статье рассмотрены такие вопросы:
Influence of carbon black filler on pyrolysis kinetic behaviour and TG-FTIR-GC?MS analysis of glass fibre reinforced polymer composites
1 место - продано (договор 461)
2 место - продано (договор 462)
3 место - продано (договор 463)
4 место - продано (договор 464)
5 место - продано (договор 465)
6 место - продано (договор 466)

Дополнительно по статье:
Recently, several filler materials, such as carbon black (CB), have been added to glass fibre reinforced polymers (GFRP) to enhance their mechanical and electrical performance. So far, we have insufficient information on the effect of these additives on the recyclability of GFRP and the resulting products. Within this context, this is the first research developed to study the effect of these additives on pyrolysis behaviour of GFRP. The experiments were started with dispersion of CB in epoxy resin solution, then CB/GFRP panels were prepared using vacuum-assisted resin transfer technique, followed by grinding to prepare the feedstock. The ultimate, proximate, and morphological properties of the CB/GFRP samples were analysed. Afterwards, TG-FTIR-GC measurements were conducted on the milled samples at several heating rates. Depending on the TG analysis, the pyrolysis kinetics of CB/GFRP were studied using both linear and nonlinear isoconversional methods (i.e., Kissinger, KAS, FWO Friedman, Vyazovkin, and Cai). Also, TGA-DTG data was simulated using the distributed activation energy model and the independent parallel reactions kinetic model. The results show that the fibre is rich in volatile content (45%), while aromatic benzene and C?H bond were the major groups in the TG-FTIR analysis. In addition, phenol and p-Isopropenylphenol were the major compounds in the GC-Ms measurements with abundance of 67% (with improvement of 146% compared with neat GFRP) and 33%. Meanwhile, the pyrolysis kinetic showed that KAS, Vyazovkin, and Cai models are the most appropriate isoconversional methods that can be used to study of the pyrolysis kinetic of CB/GFRP with estimated activation energies in the ranges of 198?209 kJ/mol (with improvement of 64% compared with neat GFRP). Based on that, the filler materials added to GFRP composites, including CB filler, act as self-catalysts during the pyrolysis treatment leading to increased yield and better quality of the formulated volatile compounds.
Ключевые слова:
Glass fibre reinforced polymers; Plastic waste; Pyrolysis kinetic; Pyrolysis treatment; Renewable energy


Заказать публикацию № 46

Номер заказа № 46

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#47Декабрь 2020 выход журнала
Набор в журнал до 10-11-2019
328000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли98400877407708065600
№ 47.1№ 47.2№ 47.3№ 47.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1;
CiteScore: 13,1;
Percentile 97; 95;
Sjr: 1,489;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q1;
IF: 7.514;
CiteScore: 156.901;
Science Citation Index Expanded;
Специализация журнала:
Food Science; Analytical Chemistry;
Chemistry, Applied; Nutrition + Dietetics; Food Science + Technology;
В статье рассмотрены такие вопросы:
Sensitive lateral flow immunoassay for the detection of pork additives in raw and cooked meat products
1 место - продано (договор 471)
2 место - продано (договор 472)
3 место - продано (договор 473)
4 место - продано (договор 474)

Дополнительно по статье:
In this study, we developed a lateral flow immunoassay (LFIA) for the detection of pork additives in meat products. LFIA of porcine immunoglobulins (IgG) as a molecular biomarker was carried out in a sandwich format for species identification. Gold nanoparticles as a nano-dispersed label were conjugated to secondary antibodies specific to anti-porcine IgG. The test system was characterized by high specificity, which was confirmed by the absence of cross-reactivity with any other species tested. A short technique of sample preparation was proposed aimed at the effective extraction of IgG from meat samples. The developed LFIA enabled the detection of a pork ingredient at a level as low as 0.063% (w/w) in raw meat within 35 min including sample preparation. A large panel of real meat samples was analyzed by the LFIA. The results showed that porcine IgG can be reliably recognized both in raw meat products and processed meat foodstuffs.
Ключевые слова:
Biomarkers; Immunoglobulins; Lateral flow immunoassay; Meat adulteration; Pork additives; Species identification


Заказать публикацию № 47

Номер заказа № 47

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#48Апрель 2021 выход журнала
Набор в журнал до 25-05-2020
164000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли344403198028700262402378021320
№ 48.1№ 48.2№ 48.3№ 48.4№ 48.5№ 48.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили

Q
CiteScore:
Percentile
Sjr:

Web of Science, Clarivate Analytics (Thomson Reuters)
Q2; Q3;
IF: 3.605;
CiteScore: 59.088;
Science Citation Index Expanded;
Специализация журнала:

Engineering, Chemical; Energy + Fuels;
В статье рассмотрены такие вопросы:
Application of Ethylene Tar as an Additive in Visbreaking of Petroleum Vacuum Residue
1 место - продано (договор 481)
2 место - продано (договор 482)
3 место - продано (договор 483)
4 место - продано (договор 484)
5 место - продано (договор 485)
6 место - продано (договор 486)

Дополнительно по статье:
The byproduct of ethylene tar has a high content of mono-, bi-, and polycyclic aromatic compounds, as well as cycloalkenes, including aromatic cycloalkenes. This paper evaluates the prospects of using ethylene tar as an additive in the visbreaking process of vacuum residue. A series of experiments on visbreaking of vacuum residue with additives of various refinery streams and ethylene tar were performed in a laboratory flow reactor. As a result of a comparative study of the composition of vacuum residue visbreaking products by different methods, it was shown that the use of ethylene tar compared with kerosene, light cycle oil, and heavy cycle oil allows an increased yield of the target product with a higher proportion of aromatic hydrocarbons. A comparative analysis of the characteristics of asphaltenes and resins of visbreaking products indicates a general trend of changes in the process of visbreaking vacuum residue with refinery streams and ethylene tar. A comparison of the colloidal instability index showed that the use of ethylene tar allows attainment of a more stable visbreaking product concerning refinery streams as additives.


Заказать публикацию № 48

Номер заказа № 48

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#49Декабрь 2020 выход журнала
Набор в журнал до 20-11-2019
369000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли110700984008610073800
№ 49.1№ 49.2№ 49.3№ 49.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 2;
CiteScore: 4,7;
Percentile 68; 63;
Sjr: 0,604;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q1; Q2;
IF: 3.623;
CiteScore: 52.459;
Science Citation Index Expanded;
Специализация журнала:
Condensed Matter Physics; Materials Science (all);
Metallurgy + Metallurgical Engineering; Physics, Applied; Chemistry, Physical; Materials Science, Multidisciplinary; Physics, Condensed Matter;
В статье рассмотрены такие вопросы:
Synthesis of metal matrix composites based on crxniy-tin for additive technology
1 место - продано (договор 491)
2 место - продано (договор 492)
3 место - продано (договор 493)
4 место - продано (договор 494)

Дополнительно по статье:
The novelty of this work consists of obtaining original fundamental data on the laws of synthesis of new metal matrix composite materials for additive technologies. CrN + TiNi composites were obtained using the method of self-propagating high-temperature synthesis. In this work, analysis of the parameters of the synthesis of composite materials as well as their structure and phase composition were carried out. A scheme for the formation of a composite structure is established; it is shown that the phase composition is represented by 54.6 wt.% CrN and 45.4 wt.% TiNi. It was shown that composites based on the system are suitable for machines that make use of direct laser deposition to grow layers of materials. Sample structure and phase parameters were studied. It is shown that titanium nitride particles are uniformly distributed in the CrNi intermetallic matrix, the TiN particle size ranges from 0.3 to 9 ?m and the average particle size is 2.8 ?m. The results obtained indicate the possibility of synthesizing promising metal matrix composite materials for additive technologies. Such materials may have increased hardness, operating temperature and strength.
Ключевые слова:
Additive technologies; Composite materials; Mechanical properties; Phase composition; Self-propagating high-temperature synthesis; Structure


Заказать публикацию № 49

Номер заказа № 49

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#50Декабрь 2020 выход журнала
Набор в журнал до 10-11-2019
410000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли164000136940109880
№ 50.1№ 50.2№ 50.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1;
CiteScore: 6,2;
Percentile 80;
Sjr: 0,887;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q2;
IF: 2.931;
CiteScore: 13.063;
Science Citation Index Expanded;
Специализация журнала:
Electrical and Electronic Engineering;
Physics, Applied; Engineering, Electrical + Electronic;
В статье рассмотрены такие вопросы:
Electrical Properties of Transformer Oil with the Addition of Extremely Low Concentrations of Carbon Nanotubes
1 место - продано (договор 501)
2 место - продано (договор 502)
3 место - продано (договор 503)

Дополнительно по статье:
Electrical properties of transformer oil with additives of carbon nano-tubes are studied at the extremely low concentrations of the nano-tubes. Electrical strength of the mixtures is more than an order of magnitude lower than that of pure oil. Strengthening of the large gap is registered after several breakdowns in contrast to the small gap. The formation of a carbon bridge between flat electrodes is registered optically. This bridge is destroyed by an electrical discharge in the chain of bubbles generated on the bridge. Experiments with helium bubbles floating up in the mixture of carbon nano-tubes with transformer oil are performed at the deficiency of initiating electrons. Additives of carbon nano-tubes stimulate the partial discharges in the bubbles. Also, at lower voltages, the development of intense micro-flows in the liquid dielectric is observed that can be the result of the injection of free electrons from the nano-tubes.
Ключевые слова:
bubbles; carbon nano-tubes (CNT); electrical breakdown; hydrodynamic flows; partial discharges (PD); transformer oil


Заказать публикацию № 50

Номер заказа № 50

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#51Май 2021 выход журнала
Набор в журнал до 10-06-2020
205000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли820006888054940
№ 51.1№ 51.2№ 51.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили

Q
CiteScore:
Percentile
Sjr:

Специализация журнала:


В статье рассмотрены такие вопросы:
Oxobiodegradable Polymer Materials (Review)
1 место - продано (договор 511)
2 место - продано (договор 512)
3 место - продано (договор 513)

Дополнительно по статье:
Abstract: Polymeric materials are irreplaceable in human life. Their widespread use has resulted in a serious environmental problem: after a single application, they end up in landfills, where they can remain undecayed for many decades. One solution to the problem lies in the creation of polymer materials with a predictable service life by introducing prooxidant additives, examples of which are given in this review. They make the polymer susceptible to oxidative degradation and contribute to its degradation under ambient conditions.
Ключевые слова:
metal stearates; oxobiodegradation; polyolefins; prooxidant


Заказать публикацию № 51

Номер заказа № 51

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#52Декабрь 2020 выход журнала
Набор в журнал до 05-11-2019
328000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли98400877407708065600
№ 52.1№ 52.2№ 52.3№ 52.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3;
CiteScore: 2,1;
Percentile 44; 41; 40; 34;
Sjr: 0,274;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q3; Q4;
IF: 1.029;
CiteScore: 1.657;
Science Citation Index Expanded;
Специализация журнала:
Chemistry (all); Chemical Engineering (all); Energy Engineering and Power Technology; Fuel Technology; Geochemistry and Petrology;
Engineering, Petroleum; Energy + Fuels; Engineering, Chemical; Chemistry, Physical; Chemistry, Organic;
В статье рассмотрены такие вопросы:
Hydrogenation of Butadiene?Styrene Rubber over Palladium Nanoparticles Synthesized In Situ: Selection of Stabilizer
1 место - продано (договор 521)
2 место - продано (договор 522)
3 место - продано (договор 523)
4 место - продано (договор 524)

Дополнительно по статье:
Abstract: Nanoparticles were synthesized from water-soluble and oil-soluble palladium precursors, specifically palladium acetate and palladium 2-ethylhexanoate, in cyclohexane/benzene solutions of butadiene?styrene rubber (BSR). Palladium nanoparticles prepared in situ were demonstrated to be active in the hydrogenation of the aromatic and olefin moieties of BSR. The degrees of hydrogenation of aromatic moieties at 140?C and 5 MPa hydrogen pressure in the presence of the catalysts synthesized from palladium acetate and palladium 2-ethylhexanoate were 29 and 77%, respectively. In the case of the water-soluble precursor, various surfactants were added to the reaction mixture as stabilizers of palladium particles in an attempt to enhance the degree of hydrogenation. Among them, the highest degree of hydrogenation was achieved in the presence of acetonitrile, compared to the reaction mixtures that contained sucrose, polyethylene glycol, or glycerol additives. The effect of the solvent composition (specifically, of the benzene to cyclohexane ratio) on the degree of BSR hydrogenation was identified. The optimum benzene to cyclohexane ratio is 2 : 8. In this case, the degrees of hydrogenation of aromatic and olefin moieties using palladium 2-ethylhexanoate reach 85 and 94%, respectively. [Figure not available: see fulltext.].
Ключевые слова:
butadiene?styrene rubber; dispersed phase catalysis; hydrogenation of polymers; palladium nanoparticles; unsupported catalyst


Заказать публикацию № 52

Номер заказа № 52

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#53Октябрь 2020 выход журнала
Набор в журнал до 15-09-2019
369000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли14760012300098400
№ 53.1№ 53.2№ 53.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,5;
Percentile 44; 34; 30; 20;
Sjr: 0,261;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q4;
IF: 0.864;
CiteScore: 3.757;
Science Citation Index Expanded;
Специализация журнала:
Metals and Alloys; Chemical Engineering (all); Materials Chemistry; Inorganic Chemistry;
Materials Science, Multidisciplinary;
В статье рассмотрены такие вопросы:
Effect of the Combustion Temperature of Al + AlN Mixtures on the Content of Oxygen Dissolved in the Structure of Aluminum Nitride
1 место - продано (договор 531)
2 место - продано (договор 532)
3 место - продано (договор 533)

Дополнительно по статье:
Abstract?: We have studied the influence of the combustion temperature of Al + AlN mixtures in nitrogen and the cooling time of the synthesis products on the content of oxygen impurities dissolved in the aluminum nitride lattice. The results demonstrate that, in the temperature range 1460?2000?C, surface oxygen is incorporated into the structure of AlN. It has been shown that, with increasing synthesis temperature, the content of oxygen dissolved in aluminum nitride rises. The concentration of dissolved oxygen is higher in the case of a finer particle diluent (AlN). Raising the synthesis temperature leads to aluminum nitride grain growth and coalescence, characteristic of secondary recrystallization. We demonstrate that, to reduce the concentration of oxygen impurities dissolved in aluminum nitride, the starting mixture should contain additives facilitating the reduction of aluminum oxide or surface oxygen vaporization.
Ключевые слова:
aluminum nitride; crystal lattice; oxygen impurities; particle size; self-propagating high-temperature synthesis; structure formation


Заказать публикацию № 53

Номер заказа № 53

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#54Июль 2021 выход журнала
Набор в журнал до 20-08-2020
328000 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли8036072980664205904051660
№ 54.1№ 54.2№ 54.3№ 54.4№ 54.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 2;
CiteScore: 4,7;
Percentile 68; 63;
Sjr: 0,604;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q1; Q2;
IF: 3.623;
CiteScore: 52.459;
Science Citation Index Expanded;
Специализация журнала:
Condensed Matter Physics; Materials Science (all);
Metallurgy + Metallurgical Engineering; Physics, Applied; Chemistry, Physical; Materials Science, Multidisciplinary; Physics, Condensed Matter;
В статье рассмотрены такие вопросы:
Structure and properties of Ti/Ti64 graded material manufactured by laser powder bed fusion
1 место - продано (договор 541)
2 место - продано (договор 542)
3 место - продано (договор 543)
4 место - продано (договор 544)
5 место - продано (договор 545)

Дополнительно по статье:
Multimaterial additive manufacturing is an attractive way of producing parts with improved functional properties by combining materials with different properties within a single part. Pure Ti provides a high ductility and an improved corrosion resistance, while the Ti64 alloy has a higher strength. The combination of these alloys within a single part using additive manufacturing can be used to produce advanced multimaterial components. This work explores the multimaterial Laser Powder Bed Fusion (L-PBF) of Ti/Ti64 graded material. The microstructure and mechanical properties of Ti/Ti64-graded samples fabricated by L-PBF with different geometries of the graded zones, as well as different effects of heat treatment and hot isostatic pressing on the microstructure of the bimetallic Ti/Ti64 samples, were investigated. The transition zone microstructure has a distinct character and does not undergo significant changes during heat treatment and hot isostatic pressing. The tensile tests of Ti/Ti64 samples showed that when the Ti64 zones were located along the sample, the ratio of cross-sections has a greater influence on the mechanical properties than their shape and location. The presented results of the investigation of the graded Ti/Ti64 samples allow tailoring properties for the possible applications of multimaterial parts.
Ключевые слова:
Additive manufacturing; Graded materials; Multimaterial 3D printing; Selective laser melting; Titanium alloys


Заказать публикацию № 54

Номер заказа № 54

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#55Ноябрь 2020 выход журнала
Набор в журнал до 10-10-2019
410000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли852807872072160656005904052480
№ 55.1№ 55.2№ 55.3№ 55.4№ 55.5№ 55.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 2;
CiteScore: 4,7;
Percentile 68; 63;
Sjr: 0,604;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q1; Q2;
IF: 3.623;
CiteScore: 52.459;
Science Citation Index Expanded;
Специализация журнала:
Condensed Matter Physics; Materials Science (all);
Metallurgy + Metallurgical Engineering; Physics, Applied; Chemistry, Physical; Materials Science, Multidisciplinary; Physics, Condensed Matter;
В статье рассмотрены такие вопросы:
Structural design method for constructions: Simulation, manufacturing and experiment
1 место - продано (договор 551)
2 место - продано (договор 552)
3 место - продано (договор 553)
4 место - продано (договор 554)
5 место - продано (договор 555)
6 место - продано (договор 556)

Дополнительно по статье:
The development of additive manufacturing technology leads to new concepts for design implants and prostheses. The necessity of such approaches is fueled by patient-oriented medicine. Such a concept involves a new way of understanding material and includes complex structural geometry, lattice constructions, and metamaterials. This leads to new design concepts. In the article, the structural design method is presented. The general approach is based on the separation of the micro-and macro-mechanical parameters. For this purpose, the investigated region as a complex of the basic cells was considered. Each basic cell can be described by a parameters vector. An initializing vector was introduced to control the changes in the parameters vector. Changing the parameters vector according to the stress-strain state and the initializing vector leads to changes in the basic cells and consequently to changes in the microarchitecture. A medium with a spheroidal pore was considered as a basic cell. Porosity and ellipticity were used for the parameters vector. The initializing vector was initialized and depended on maximum von Mises stress. A sample was designed according to the proposed method. Then, solid and structurally designed samples were produced by additive manufacturing technology. The samples were scanned by computer tomography and then tested by structural loads. The results and analyses were presented.
Ключевые слова:
Additive manufacturing; CT; Porous constructions; Structural design


Заказать публикацию № 55

Номер заказа № 55

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#56Август 2020 выход журнала
Набор в журнал до 20-07-2019
287000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли598605494050840459204100036900
№ 56.1№ 56.2№ 56.3№ 56.4№ 56.5№ 56.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 2;
CiteScore: 2,2;
Percentile 58;
Sjr: 0,377;

Специализация журнала:
Metals and Alloys;

В статье рассмотрены такие вопросы:
Microstructure and Mechanical Properties of Cu-6.5%Al Alloy Deposited by Wire Arc Additive Manufacturing
1 место - продано (договор 561)
2 место - продано (договор 562)
3 место - продано (договор 563)
4 место - продано (договор 564)
5 место - продано (договор 565)
6 место - продано (договор 566)

Дополнительно по статье:
In this work, Cu-6.5% Al alloy was deposited by wire arc additive manufacturing based on cold metal transfer (CMT) welding process, through separate feeding of pure Cu and Al wires into a molten pool, onto a 3-mm pure copper plate. The deposited alloy was homogenized by heat treatment at 800 ?C (2 h) and evaluated for their microstructure using optical microscopy, scanning electron microscopy and transmission electron microscopy, and mechanical properties. The paper discusses the structure-mechanical property correlation under both as-fabricated and heat-treated condition. Results reveal that (1) the CMT welding process is efficient in making Cu-Al alloy with target chemical composition, (2) heat treatment improved solid solution strengthening effect, which improved the hardness, and (3) heat treatment improved tensile strength properties and ductility of the alloy.
Ключевые слова:
additive manufacturing; Cu-Al alloy; heat treatment; mechanical properties; microstructure


Заказать публикацию № 56

Номер заказа № 56

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#57Март 2021 выход журнала
Набор в журнал до 20-04-2020
369000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли110700984008610073800
№ 57.1№ 57.2№ 57.3№ 57.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1; 2;
CiteScore: 6,7;
Percentile 79; 68; 55;
Sjr: 0,789;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q2;
IF: 5.062;
CiteScore: 5.851;
Science Citation Index Expanded;
Специализация журнала:
Physical and Theoretical Chemistry; Process Chemistry and Technology; Catalysis;
Chemistry, Physical;
В статье рассмотрены такие вопросы:
The influence of Fe(III) acetylacetonate and o-phenanthroline towards improvement of NHPI-catalyzed cumene oxidation
1 место - продано (договор 571)
2 место - продано (договор 572)
3 место - продано (договор 573)
4 место - продано (договор 574)

Дополнительно по статье:
Cumene hydroperoxide (CHP) is the most important product or intermediate in the oxidative processing of cumene. In the present study, cooperative action of NHPI catalyst with Fe(acac)3/Phen additives in oxidation of cumene has been described in terms of oxidation rate and selectivity for products, notably CHP, under variable conditions. The oxidation characteristics were influenced by promoting additives, the main function of which was to generate an active PINO radical. An abundance of the additives might enhance the non-selective conversion of intermediates and decomposition of CHP, which led to a decrease in CHP selectivity. The addition of 0.0003 mol% Fe(acac)3 was sufficient to initiate NHPI catalyzed fast cumene oxidation and very selective CHP production at 50 ??C. Phen showed an impressive multifaceted effect, as the increase in its amount initially lowered the CHP selectivity and then increased to 95% with a large excess of Phen over Fe(acac)3. That was due to the different ability of iron complexes of various compositions to react to NHPI and to CHP. UV-VIZ spectroscopy and DFT calculation was used to elucidate assistance of Phen in reduction of Fe(acac)3 with NHPI and creation of FeII/FeIII ?Phen2or3 complexes as reversible single-electron carriers upon catalysis by NHPI. In addition, the selective formation of CHP contributes to the resistance of NHPI to degradation during catalysis.
Ключевые слова:
Cumene; Homogeneous catalysis; Iron(III) acetylacetonate; N-hydroxyphthalimidel; O-Phenantroline; Oxidation


Заказать публикацию № 57

Номер заказа № 57

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#58Март 2021 выход журнала
Набор в журнал до 20-04-2020
369000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли762607052064780590405330047560
№ 58.1№ 58.2№ 58.3№ 58.4№ 58.5№ 58.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1;
CiteScore: 13,2;
Percentile 94; 91; 89;
Sjr: 1,515;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q1;
IF: 7.267;
CiteScore: 35.856;
Science Citation Index Expanded;
Специализация журнала:
Surfaces, Coatings and Films; Electronic, Optical and Magnetic Materials; Renewable Energy, Sustainability and the Environment;
Physics, Applied; Materials Science, Multidisciplinary; Energy + Fuels;
В статье рассмотрены такие вопросы:
A-site tailoring in the vacancy-ordered double perovskite semiconductor Cs2SnI6 for photovoltaic application
1 место - продано (договор 581)
2 место - продано (договор 582)
3 место - продано (договор 583)
4 место - продано (договор 584)
5 место - продано (договор 585)
6 место - продано (договор 586)

Дополнительно по статье:
Air-stable caesium tin iodide (Cs2SnI6) double perovskite are highly desirable for substituting the lead-based halide perovskite solar cells. In this work, we have investigated the effect of A-site tailoring in Cs2SnI6 by adding monovalent cation (Rb and Ag) on film growth properties, (morphology, structural properties, opto-physical properties), optoelectronic properties, and device characteristics. The crystal analysis suggests that the A-site additives suppress CsI secondary phase in (Cs1-xAx)2SnI6 film for x0.5 whereas multiple secondary phases occur in higher additive content. The opto-physical properties reveal a small change in bandgap energy for alloyed film and excellent thermal stability in ambient air. The inverted device structure ITO/CuI/Cs2SnI6-alloyed/PCBM/AZO/Ag, for the first time, demonstrated the improvement in device parameters (with VOC~ 0.38 V and efficiency of ~0.66%) for the alloyed films. The capacitance analysis reveals that the high defect density in bulk as well as at the interface (Nt1019 cm3) has a deleterious effect on the device performance. In this work, we underline insight into the A-site tailoring of Cs2SnI6 double perovskite and the dominant limiting factors for getting high device performance.
Ключевые слова:
A-site alloying; Ambient air deposition; Cs2SnI6; Defect profile


Заказать публикацию № 58

Номер заказа № 58

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#59Октябрь 2020 выход журнала
Набор в журнал до 20-09-2019
123000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли254202378022140196801804016400
№ 59.1№ 59.2№ 59.3№ 59.4№ 59.5№ 59.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили

Q
CiteScore:
Percentile
Sjr:

Специализация журнала:


В статье рассмотрены такие вопросы:
Development of Fast Exponentiation Algorithm ?To Center and Back?
1 место - продано (договор 591)
2 место - продано (договор 592)
3 место - продано (договор 593)
4 место - продано (договор 594)
5 место - продано (договор 595)
6 место - продано (договор 596)

Дополнительно по статье:
In the present paper the exponentiation algorithm To Center and Back based on the idea of the additive chains exponentiation method is developed. The created by authors algorithm allows to reduce the calculation time and to improve the performance of conventional and cryptographic algorithms, as pre-quantum and quantum, and then post-quantum, in which it is necessary to use the fast exponentiation algorithm.
Ключевые слова:
additive chains; binary Al-Kashi algorithm; exponentiation; left-to-right scheme; right-to-left scheme


Заказать публикацию № 59

Номер заказа № 59

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#60Январь 2021 выход журнала
Набор в журнал до 05-02-2020
123000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли254202378022140196801804016400
№ 60.1№ 60.2№ 60.3№ 60.4№ 60.5№ 60.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили

Q
CiteScore:
Percentile
Sjr:

Специализация журнала:


В статье рассмотрены такие вопросы:
Biocidal Polymer Formulations and Coatings
1 место - продано (договор 601)
2 место - продано (договор 602)
3 место - продано (договор 603)
4 место - продано (договор 604)
5 место - продано (договор 605)
6 место - продано (договор 606)

Дополнительно по статье:
Abstract: Using key publications, the review analyzes fundamental methods for synthesizing polymer biocides of varying chemical structure and discusses the mechanism behind the effect of the described formulations and their areas of application. High molecular weight compounds with inherent biocidal activity and opportunities for modification of polymers through chemical transformations or introduction of organic or inorganic additives are considered. The key focus of this review is on the analysis of approaches to the production of antibacterial coatings. Particular attention is given to the prospects of using cationic polyelectrolytes and metallopolymer compounds to which the resistance of pathogenic bacteria is not developed.


Заказать публикацию № 60

Номер заказа № 60

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

Перейти № 61-90