Языки, на которых мы говорим: [Darya] [Yu Long] [Amir] [Anh] [Mais] [Darya] Контакты
Стать соавтором готовой статьи | Продать свою статью Перейти к актуальным темам
На этой странице Вы можете выбрать статью по своему направлению и стать одним из соавторов. Ниже информация о каждой публикации. Справа информация о стоимости, журнале, сроках подачи и сроках публикации. Слева краткое описание статьи и ключевые слова. Если в списке, на этой странице, Вы нашли подходящую статью, укажите её номер # (Номер заказа) и укажите под каким номером по порядку в списке авторов Вы хотите быть. Если у Вас есть срочные вопросы или Вы не разобрались как пользоваться сайтом, позвоните в WhatsApp / Viber / по телефону / напишите на почту. Все контакты указаны возле каждой темы.
Объединяем авторов и гарантируем публикацию Scopus и Web of Science
Вы можете присоединиться к коллективу авторов, статьи которых уже
приняты в журнал, оплатив часть стоимости публикации.
При желании, Вы можете внести собственные правки в статью.

Купим дорого хорошие статьи
Если Вы пишите и публикуете собственные статьи в журналах Scopus и Web of Science
мы найдём Вам соавторов и хорошо заплатим за публикацию.
Если Вы оплатили публикацию на сайте, пришлите квитанцию менеджеру на WhatsApp, Viber или e-mail

Текущие договоры


#1Август 2018 выход журнала
Набор в журнал до 25-07-2017
162500 руб7 чел. (авторов) в этой статье

Соавтор1234567
проданопроданопроданопроданопроданопроданопродано
Рубли29250273002535023400214501950017550
№ 1.1№ 1.2№ 1.3№ 1.4№ 1.5№ 1.6№ 1.7
ДоговорДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
Highly hydrophilic and stable polylactic acid surface achieved by argon plasma treatment
1 место - продано (договор 11)
2 место - продано (договор 12)
3 место - продано (договор 13)
4 место - продано (договор 14)
5 место - продано (договор 15)
6 место - продано (договор 16)
7 место - продано (договор 17)

Дополнительно по статье:
The effect of modifying additives such as low molecular weight polylactide (PLA) and benzyl alcohol (BA) on the degree of hydrophilicity of high molecular weight PLA before and after plasma treatment with low density and specific power per area was investigated. The lowest water contact angle (WCA) after modification was about 17?. A comparative evaluation of the formed functional groups amount, the hydrophilicity and stability of the plasma modification was carried out. WCA measurements of ageing of modified samples over time up to one year was carried out. It was found that plasma treated PLA films, obtained from tetrahydrofuran solution of high-molecular weight PLA and BA, demonstrated one of the highest ageing stability at high hydrophilicity. At the same time, the increase of the oxygen-containing functional groups amount on the modified PLA surface (about 40%, estimated by XPS) is close to the critical value in point of view of ensuring both high hydrophilicity and stability of the PLA surface after the modification.


Заказать публикацию № 1

Номер заказа № 1

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#2Октябрь 2018 выход журнала
Набор в журнал до 25-09-2017
162500 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли49400435503835032500
№ 2.1№ 2.2№ 2.3№ 2.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,6;
Percentile 20; 16;
Sjr: 0,202;

Специализация журнала:
Earth and Planetary Sciences (all); Environmental Science (all);

В статье рассмотрены такие вопросы:
Lifetime correction of quality indicators of pork
1 место - продано (договор 21)
2 место - продано (договор 22)
3 место - продано (договор 23)
4 место - продано (договор 24)

Дополнительно по статье:
For the first time, the composition of a feed additive from modern biologically active substances and natural components with a synergistic effect has been scientifically substantiated, which is capable of forming biologically complete, environmentally friendly products in animals at the final stage of growing (a month before slaughter). This additive consists of,%: 95.5-micronized full fat soya (source of leucine-controller of adipopexis), 3.5-betaine (osmoprotection moisture retention in muscle tissue), 0.3-L-carnitine (an activator of energy metabolism), 0.7-Lisofort (emulsifier of fats, improving its digestion). It was found that the use of a functional feed additive in the amount of 2.0% 30 days before slaughter of pigs increases its productivity by 9.3%, reduces feed costs for products by 8.4%. In muscle tissue, fat content increased by 0.85 %, characterizing the improvement of marbling of meat. The moisture-binding ability increased by 8.0%, the color intensity by 5.0 units of extinction, and a protein-quality indicator of meat due to an increase of 4.68% in the content of essential amino acids. The economic efficiency of the use of functional feed additives for the final fattening of pigs was calculated.


Заказать публикацию № 2

Номер заказа № 2

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#3Сентябрь 2018 выход журнала
Набор в журнал до 05-08-2017
162500 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли4030036400325002925025350
№ 3.1№ 3.2№ 3.3№ 3.4№ 3.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,6;
Percentile 20; 16;
Sjr: 0,202;

Специализация журнала:
Earth and Planetary Sciences (all); Environmental Science (all);

В статье рассмотрены такие вопросы:
Optimization of energy costs for drying ferrocene-containing wastes of winemaking
1 место - продано (договор 31)
2 место - продано (договор 32)
3 место - продано (договор 33)
4 место - продано (договор 34)
5 место - продано (договор 35)

Дополнительно по статье:
The paper is devoted to the study of the processes of heat and mass exchange, when drying ferrocene containing wastes of winemaking (FWW), and to the preparation of those wastes to be fed to dairy cattle. The goals of the article are: to determine the amount of energy costs for drying FWW that are necessary for calculating the net cost of feed additives, and to estimate the economic efficiency of the suggested technological and technical solutions; and also to justify and develop the methods for estimating quantitative parameters when removing liquid from the wastes of wine production. Moisture and heat exchange are studied in the heat agent-drying object system for convective and infrared drying. A combined method is proposed for drying winemaking waste, to substantiate the sequence of stages and parameters of the process, a graph-analytic model, that is dwelled on the basic principles of convective and infrared drying, is designed. Numerical calculations helped to obtain graphical dependences of the energy costs of the drying process on the air velocity in the drying chamber at different temperatures of the air (for convective and infrared). The model of drying in the form of comparative graphical dependences of the reduced value of the drying speed to the heat flux on the moisture content of the mass subjected to drying is presented. Given the above data, it is recommended to use combined two-phase drying: in the first phase, use infrared radiation, when in the second phase-convective way, in order to reduce the humidity of ferrocene containing winemaking wastes from initial moisture content of 80% to the required value of 18-20% with the further use as neutralizing additives in the feed of dairy cattle. It is also suggested to use the renewable energy sources for heating in order to cut the expenses in the phase of convective drying.


Заказать публикацию № 3

Номер заказа № 3

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#4Сентябрь 2018 выход журнала
Набор в журнал до 10-08-2017
97500 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли2405022100195001755015600
№ 4.1№ 4.2№ 4.3№ 4.4№ 4.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,6;
Percentile 20; 16;
Sjr: 0,202;

Специализация журнала:
Earth and Planetary Sciences (all); Environmental Science (all);

В статье рассмотрены такие вопросы:
Sheep productivity when probiotic feed additive amilocin introduced into the diets
1 место - продано (договор 41)
2 место - продано (договор 42)
3 место - продано (договор 43)
4 место - продано (договор 44)
5 место - продано (договор 45)

Дополнительно по статье:
The paper presents the results of a study on the effect of probiotic feed additive Amilotsin on the productivity of pregnant ewes and castrate rams. The ewes who received the optimal level of Probiotic feed additive (PFA) Amilotsin in the diet throughout the entire experiment were significantly superior in their live weight to their analogues. Animals of the second group at the end of the experiment had a live weight higher by 3.4% than in the first and by 2.4% compared to the third group. The highest average daily gains during the study period were in ewes of the second group, then in animals of the third group. Castrate rams of the first experimental group treated with the composition of the basic diet of the feed additive Amilotsin in the amount of 0.38 and 0.19 g/kg of live weight per day during the entire experimental period had an average and absolute live weight higher than the control group, the second and the third experimental groups.


Заказать публикацию № 4

Номер заказа № 4

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#5Сентябрь 2018 выход журнала
Набор в журнал до 10-08-2017
97500 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли2405022100195001755015600
№ 5.1№ 5.2№ 5.3№ 5.4№ 5.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,6;
Percentile 20; 16;
Sjr: 0,202;

Специализация журнала:
Earth and Planetary Sciences (all); Environmental Science (all);

В статье рассмотрены такие вопросы:
Functional pasta on the basis of combining the food raw materials
1 место - продано (договор 51)
2 место - продано (договор 52)
3 место - продано (договор 53)
4 место - продано (договор 54)
5 место - продано (договор 55)

Дополнительно по статье:
The necessity for using the functional food products is dictated by the need of the human body for biologically active substances, which are insufficient in a normal diet. Currently, the assortment of domestic enterprises has almost no functional pasta. In the long term, borrowed European recipes will be presented on the Russian market, which can be an alternative to traditional types of products such as egg noodles and doughboys. The purpose of the research was to develop a recipe and technology for the production of functional Rattles pasta made of soft wheat flour, using German Sptzle doughboys as a prototype. Baking flour, linseed flour, milk powder and table eggs were used as the main ingredients. In order to increase the nutritional and biological value of a functional food product, it is advisable to additionally use ingredients that improve the functioning of the human organism. Such ingredients may include food additives such as spices of natural origin: turmeric and nutmeg. Using the technology of German doughboys Sptzle as a basis and the proposed set of ingredients as part of the recipe, innovative Rattles pasta has been developed. It is a functional product due to the content of flax flour and aromatic additives such as turmeric and nutmeg.


Заказать публикацию № 5

Номер заказа № 5

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#6Сентябрь 2018 выход журнала
Набор в журнал до 10-08-2017
130000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли39000351003055026000
№ 6.1№ 6.2№ 6.3№ 6.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
Architectural design of residential modules using additive technologies
1 место - продано (договор 61)
2 место - продано (договор 62)
3 место - продано (договор 63)
4 место - продано (договор 64)

Дополнительно по статье:
The study focuses on the use of additive technologies in the field of architecture and design. The relationship between 3D printing technology and the main factors influencing the formation of the structural architectural typology is revealed. The main principle of the whole variety architectural forms systematization with a set of applied technologies and materials is traced. The impact of additive technologies on materials as well as on the concept of an architectural object and its function is analyzed in detail. The work developed and supplemented the features of the architectural objects formation using 3D-printing. The analysis and systematization of its practical implementation in Russia and abroad, taking into account the structural and functional features, is undertaken.


Заказать публикацию № 6

Номер заказа № 6

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#7Август 2018 выход журнала
Набор в журнал до 05-07-2017
130000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли39000351003055026000
№ 7.1№ 7.2№ 7.3№ 7.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 0,8;
Percentile 25; 21; 19;
Sjr: 0,237;

Специализация журнала:
Earth and Planetary Sciences (all); Energy (all); Environmental Science (all);

В статье рассмотрены такие вопросы:
Soil concrete based on waste of heat power engineering and siftings of rock grinding
1 место - продано (договор 71)
2 место - продано (договор 72)
3 место - продано (договор 73)
4 место - продано (договор 74)

Дополнительно по статье:
The possibility of recycling large-tonnage waste of heat power engineer-ing and mining industry in road construction is shown. Compositions of road-building materials were researched, containing siftings of rock grinding, fly ash, Portland cement, modified with a stabilizing additive of polymeric nature. X-ray phase analysis showed availability of quartz in fly ash, calcite, feldspars, goethite and X-ray amorphous phase, what is consistent with the data of infrared spectroscopy. By atomic emission spectrometry with inductively coupled plasma it was revealed that fly ash is latent-active and can be disposed in compositions in the presence of a stabilizing additive. The X-ray phase analysis of grinding siftings showed that it contains quartz, feldspars, chlorite, calcite and dolomite. The specific activity of natural radionuclides (226Ra, 232Th, 40ds) of fly ash and grinding siftings was 248 and 110 Bq/kg, which allows using such waste in construction without restrictions. It was revealed that the initial mineral raw materials belong to multiphase polymineral systems; therefore, when modifying them with stabilizing additives, binding of finely divided particles should be taken into account. It was revealed that the optimal content of Portland cement and fly ash in samples is 8 and 10 wt.%. It was found that an increase in the mass fraction of fly ash in the composition of soil-concrete up to 30 wt.% leads to softening of the samples and a decrease in their strength characteristics.


Заказать публикацию № 7

Номер заказа № 7

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#8Сентябрь 2018 выход журнала
Набор в журнал до 25-08-2017
97500 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли29250260002275019500
№ 8.1№ 8.2№ 8.3№ 8.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 0,8;
Percentile 25; 21; 19;
Sjr: 0,237;

Специализация журнала:
Earth and Planetary Sciences (all); Energy (all); Environmental Science (all);

В статье рассмотрены такие вопросы:
Study of the influence of disintegrated biomass of chlorella sorokiniana on the state of yeast saccharomyces cerevisiae
1 место - продано (договор 81)
2 место - продано (договор 82)
3 место - продано (договор 83)
4 место - продано (договор 84)

Дополнительно по статье:
The physiological state of Saccharomyces cerevisiae yeast used in fermentation plants is strongly influenced by various stress factors, stimulants and top dressing. Effective yeast activation reduces the time it takes to prepare the finished product and increase its quality. Chlorella sorokiniana is a fast-growing microalgae, its biomass is a promising source of protein, carbohydrates, antioxidants, vitamins, magnesium and other components. Its cells have a powerful cell membrane, so the necessary step is the disintegration of the microalgae biomass. Ultrasonic, microwave disintegration methods, as well as mechanical using a high-speed homogenizer were used. When introducing disintegrated biomass at a concentration of 20 mg%, the most effective option compared to the control (without additives) was the use of microwave disintegration: an increase in ethanol-forming ability (by 43.5%), a visible degree of fermentation (by 39.2%), and yeast concentration cells in the population (by 31.0%). Ultrasonic and mechanical disintegration of microalgae biomass is less effective. Thus, the use of Chlorella sorokiniana microalgae as a source of valuable components is a promising way of activating the Saccharomyces cerevisiae yeast, which requires additional research in the development of technology for preliminary disintegration and complex processing of introduced biomass.


Заказать публикацию № 8

Номер заказа № 8

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#9Февраль 2019 выход журнала
Набор в журнал до 15-03-2018
130000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли39000351003055026000
№ 9.1№ 9.2№ 9.3№ 9.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
Crystallization and size effects in the technology of selective laser melting of metal powders
1 место - продано (договор 91)
2 место - продано (договор 92)
3 место - продано (договор 93)
4 место - продано (договор 94)

Дополнительно по статье:
A phenomenological model of the formation of phase nuclei by the vapor condensation mechanism over the metal melting zone is formulated. A multifractal analysis of the structure of steels manufactured from powders of different chemical composition by additive technology is presented. It is shown that the solidification of the molten metal is determined by the technological scheme of the selective process.


Заказать публикацию № 9

Номер заказа № 9

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#10Январь 2019 выход журнала
Набор в журнал до 20-02-2018
97500 руб7 чел. (авторов) в этой статье

Соавтор1234567
проданопроданопроданопроданопроданопроданопродано
Рубли17550169001560014300130001170011050
№ 10.1№ 10.2№ 10.3№ 10.4№ 10.5№ 10.6№ 10.7
ДоговорДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
The effect of transition metal oxides on the sintering and properties of ceramics in the ZrO2-Al2O3 system
1 место - продано (договор 101)
2 место - продано (договор 102)
3 место - продано (договор 103)
4 место - продано (договор 104)
5 место - продано (договор 105)
6 место - продано (договор 106)
7 место - продано (договор 107)

Дополнительно по статье:
The paper presents the results of the investigation of the transition metals oxides - cobalt and iron additives influence on the sintering and properties of the ceramic material based on ZrO2- Al2O3 system with 10 wt.% Al2O3. It is shown that the addition of the oxides resulted in the significant increase of the sintered ceramic materials ZrO2-10%Al2O3 strength and decrease of sintering temperature. The maximum bending strength was more than 800 MPa (sintered at 1450 ?C) and porosity was less than 1%.


Заказать публикацию № 10

Номер заказа № 10

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#11Сентябрь 2018 выход журнала
Набор в журнал до 25-08-2017
130000 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли3185029250266502340020800
№ 11.1№ 11.2№ 11.3№ 11.4№ 11.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
The behavior of radioactive metals (Am, Eu, Sr) during the processing of radioactive graphite in salt melts
1 место - продано (договор 111)
2 место - продано (договор 112)
3 место - продано (договор 113)
4 место - продано (договор 114)
5 место - продано (договор 115)

Дополнительно по статье:
The behavior of Am, Eu, Sr radionuclides was investigated by thermodynamic modeling method at heating of radioactive graphite in NaCl - KCl - Na2CO3 - K2CO3 molten salt with additives of nickel oxide NiO. The integrated thermodynamic analysis was carried out by means of TERRA software in temperature range 373-3273 K to determine possible composition of condensed and gaseous phases. It was established that americium is in gaseous state in temperature range 2773-3273 K. Europium is in the forms of gaseous EuO and Eu in temperature range 2373-3273 K. Strontium is in the forms of gaseous SrCl2, SrCl, Sr, SrO in temperature range 2373-3273 K.


Заказать публикацию № 11

Номер заказа № 11

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#12Апрель 2019 выход журнала
Набор в журнал до 20-05-2018
325000 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли7995072800650005785050700
№ 12.1№ 12.2№ 12.3№ 12.4№ 12.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 1;
CiteScore: 10,3;
Percentile 98; 96;
Sjr: 0,958;

Web of Science, Clarivate Analytics (Thomson Reuters)
Q1; Q2;
IF: 5.467;
CiteScore: 23.333;
Science Citation Index Expanded;
Специализация журнала:
Geology; Geochemistry and Petrology;
Mineralogy; Chemistry, Physical; Materials Science, Multidisciplinary;
В статье рассмотрены такие вопросы:
Effect of thermochemical activation of clay raw materials on phase formation, microstructure and properties of aluminosilicate proppants
1 место - продано (договор 121)
2 место - продано (договор 122)
3 место - продано (договор 123)
4 место - продано (договор 124)
5 место - продано (договор 125)

Дополнительно по статье:
In this study, the complex influence of the preliminary calcination temperature of refractory clay raw materials and mineralizing oxide additives on phase formation, microstructure and properties of aluminosilicate proppants was researched. The morphology structure and phase composition of specimens were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results show that the effectiveness on the addition of 3d-transition element oxides (Fe2O3 and MnO2) and alkaline and alkaline earth oxides (Na2O, MgO, CaO) and B2O3 to the sintering process of samples based on kaolin depends on the temperature of preliminary kaolin calcination (900?1100 ?C) and temperature sample sintering (1350?1450?C). Based on the effectiveness of the influence on aluminosilicate ceramic sintering at the temperature range of 1400?1450?C, the recommended additives can be sequentially arranged as follows: Fe2O3 MgO MnO2 Na2O B2O3 CaO. The thermal activity scheme for each group of mineralizer additives depending on the temperature conditions of the consolidation process has been proposed in this study. The use of mineralizing additives with kaolin calcined at a temperature range of 980?1100 ?C produces lightweight aluminosilicate proppants with bulk density of up to 1.50 g/cm3 at sintering calcination of 1400?1450 ?C, which can endure destructive pressures up to 52 MPa.
Ключевые слова:
Kaolin; Microstructure; Mineralizer; Proppant; Sintering


Заказать публикацию № 12

Номер заказа № 12

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#13Март 2019 выход журнала
Набор в журнал до 15-04-2018
130000 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли273002535022750208001885016900
№ 13.1№ 13.2№ 13.3№ 13.4№ 13.5№ 13.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
Furfurylglycidyl ether: A new effective active diluent for epoxy resins from bio-renewable raw materials
1 место - продано (договор 131)
2 место - продано (договор 132)
3 место - продано (договор 133)
4 место - продано (договор 134)
5 место - продано (договор 135)
6 место - продано (договор 136)

Дополнительно по статье:
New reactive diluents based on bio-renewable raw materials are widely explored as additives to traditional resins. We investigated the effect of furfurylglycidyl ether on the rheological and thermomechanical properties of a widely used epoxy binder with an anhydride hardener. It was shown that the addition of 5-15% active diluent significantly reduces the viscosity of the composition to the values optimal for RTM and vacuum infusion technologies for fiber-reinforced plastics and does not lead to a significant decrease in heat resistance and Youngs modulus of the cured binder.


Заказать публикацию № 13

Номер заказа № 13

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#14Октябрь 2018 выход журнала
Набор в журнал до 15-09-2017
130000 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли39000351003055026000
№ 14.1№ 14.2№ 14.3№ 14.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
Structure and properties of the composite material based on heat-resisting VKNA-4U alloy with oxide stiffening fillers, designed for additive manufacturing technologies of power fasteners for gas turbine engines (GTE)
1 место - продано (договор 141)
2 место - продано (договор 142)
3 место - продано (договор 143)
4 место - продано (договор 144)

Дополнительно по статье:
The influence of the structure and concentration of the stiffening component on the physicomechanical properties of the heat-resisting intermetallic alloy VKNA-4U was investigated. The dependence of the strength properties of the alloy on the composition and ratio of the hardeners -Al2O3, Y2O3, HfO2, ZrO2 was experimentally determined. Using scanning electron microscopy (SEM), it was found that when the alloy is reinforced with hafnium, yttrium and aluminum oxides, the dispersed hardener does not dissolve in the matrix. These compositions are considered as the most promising for the stiffening of VKNA-4U alloy. It is shown in this paper that the required content of the oxide reinforcing filler in the VKNA-4U matrix is 2%, at which a balance is reached between the maximum value of strength and ductility. In the future, VKNA-4U powder composition mechanically alloyed with -Al2O3, Y2O3, HfO2 oxides can be used as a building material for additive synthesis technologies for power fasteners of gas turbine engines (GTE).


Заказать публикацию № 14

Номер заказа № 14

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#15Октябрь 2018 выход журнала
Набор в журнал до 20-09-2017
130000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли526504355035100
№ 15.1№ 15.2№ 15.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
Dielectric spectroscopy of thermoplastic polyimide R-SOD in the region of medium and high temperatures
1 место - продано (договор 151)
2 место - продано (договор 152)
3 место - продано (договор 153)

Дополнительно по статье:
Molecular mobility and charge transport in R-SOD aromatic thermoplastic polyimide were studied by dielectric method. Dielectric spectra of all samples in the examined temperature and frequency range revealed two regions of dipole polarization relaxation. The -process is determined by local motion of the phenyl rings in the diamine and dianhydride moieties of the macromolecule with the adjacent groups. The -process can be associated with crossing the glass transition temperature, i.e., with the segmental large-scale mobility of the main chains. The introduction of nano-additives (R-SOD 3%) does not change the relaxation times in the regions of and process, but leads to an increase in intensity compared to pure polyimide R-SOD.


Заказать публикацию № 15

Номер заказа № 15

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#16Июнь 2019 выход журнала
Набор в журнал до 15-07-2018
130000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли526504355035100
№ 16.1№ 16.2№ 16.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
Complex dispersed analysis of particles applying in output hydrodynamic criteria decreasing dust leakage throw collectors of aspiration in construction industry
1 место - продано (договор 161)
2 место - продано (договор 162)
3 место - продано (договор 163)

Дополнительно по статье:
The article is devoted to the issue of improving the environmental safety of the construction industry by improving dust collectors of dust removal systems using additive-complex dispersive analysis of variance of dust emissions by aspiration systems. The article proposes the improvement of complex analysis of variance using hydrodynamic criteria in output functions. Modified output data and additive-simplex approach to the evaluation of characteristics-equivalent sizes and speeds of sedimentation-soiling of dust particles make it possible to determine the ranges of their changes with a higher degree of accuracy of the results. The distributions of the hydrodynamics criteria values allow us to obtain reliable meanings for sedimentation velocities and equivalent particles sizes for the studied dust samples of building materials. Analytical approach to determining the density distribution of the numerical values of the criteria allowed clarifying the values of sedimentation-soiling velocities and hydraulic equivalent sizes of particles to get more reliable of their changes ranges. The authors present the most essential regressions and mark to method determining hydraulic work regimes for design dust collectors. This approach is one of the most effective ways to improve the environmental safety of the construction industry.


Заказать публикацию № 16

Номер заказа № 16

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#17Декабрь 2018 выход журнала
Набор в журнал до 20-11-2017
162500 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли650005460043550
№ 17.1№ 17.2№ 17.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
To issue of studying mechanism of increasing strength of porous ceramic crock
1 место - продано (договор 171)
2 место - продано (договор 172)
3 место - продано (договор 173)

Дополнительно по статье:
In our country at the modern stage of the development of constructional industry the necessity arises in qualitative ceramic wall materials. The use of this items provides durability, comfort and architectural expressiveness for constructions. In connection with what is an acute problem of use of low-grade clay raw material for production of high-quality wall ceramic products. The solution of problem is to activate clay raw materials in various ways. One of relatively simple, effective and economically expedient methods of the activation of clay raw material is mechanical activation. It is used to improve the quality of dense metamorphisized clay raw materials. But it is not enough, therefore it is offered to hold extra chemical activation by adding chemical additives in raw mixtures. The purpose of present research is to study mechanism of increasing the strength of the ceramic crock affected by the fluxing additive, imputed in raw mixtures proportion based on medium-plastic clay raw materials. To achieve the given purpose, it is necessary to solve the following tasks: A) to investigate influence of fluxing additives on rheological raw mix behavior; b) to study modification mechanism of changing the properties of ceramic crock by adding fluxing additive into the raw mixtures.


Заказать публикацию № 17

Номер заказа № 17

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#18Октябрь 2018 выход журнала
Набор в журнал до 20-09-2017
130000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли526504355035100
№ 18.1№ 18.2№ 18.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
Heavy concrete with mineral additive Tripoli
1 место - продано (договор 181)
2 место - продано (договор 182)
3 место - продано (договор 183)

Дополнительно по статье:
The research results of the effect of active mineral additive tripoli of the deposits of Grishina Sloboda of the Bryansk region on the strength of heavy concrete are presented in the article. The chemical composition and structure of the sedimentary rock tripoli are studied. It is found that the tripoli grinding to the specific surface area of 340 m2/kg leads to the production of concrete class B35 with its content of 5% and class B30 with its content of 10%. The extreme dependence of the concrete strength on the tripoli content after 7 and 28 days of hardening is established. It is shown that the diminution in the sand fineness modulus from 2.87 to 1.14 reduces the concrete strength with 5%-tripoli addition from 38.9 MPa to 21.8 MPa, and with its content of 10% from 36.3 MPa to 20.4 MPa. The dependence of heavy concrete strength after 7 and 28 days of hardening on the content of its components was determined by the method of mathematical planning of the experiment, it allows predicting the values of this indicator when varying the composition of the concrete mixture.


Заказать публикацию № 18

Номер заказа № 18

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#19Май 2019 выход журнала
Набор в журнал до 10-06-2018
97500 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли390003250026000
№ 19.1№ 19.2№ 19.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
Combined roasting of raw materials modified by additives-intensifiers in form of low humidity sludge
1 место - продано (договор 191)
2 место - продано (договор 192)
3 место - продано (договор 193)

Дополнительно по статье:
This article describes the method of obtaining magnesium oxychloride cement for construction purposes. The study describes the possibility of introducing additives that intensify the process of burning magnesium-containing raw materials in the form of an aqueous solution to obtain a sludge of low humidity. The advantages of this method are described in comparison with the known method of wet granulation of ground raw material with an aqueous solution of the additive. A two-factor experiment was carried out to identify the optimal grain size of the raw material. The dependences of the change in the strength characteristics of a magnesium stone on the amount of the intensifier additive and the fractional composition of the modified raw material are described. The optimal area of the applied fraction and the amount of the additive, allowing one to obtain a magnesium stone with maximum compressive strength, has been established. The authors investigate the tendency of all samples to the formation of cracks. The reasons for the use of grain size outside the established range negatively affecting the quality of the magnesium oxychloride cement obtained are suggested.


Заказать публикацию № 19

Номер заказа № 19

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#20Август 2018 выход журнала
Набор в журнал до 25-07-2017
97500 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли390003250026000
№ 20.1№ 20.2№ 20.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
Methods for obtaining the feed additives from the starfish of the sea of Japan
1 место - продано (договор 201)
2 место - продано (договор 202)
3 место - продано (договор 203)

Дополнительно по статье:
The results of scientific studies on the justification of the use of starfish of the Sea of Japan, Patiria pectinifera and Evastaerias echinosoma, in the technology of feed products are presented. The biotoxicity level of the studied objects was evaluated, its dependence on the season was determined. Two methods for the production of feed additives from starfish were defined, taking into account the bio-toxicity of starfish and the destination of finished products. The method of enzymatic hydrolysis (using the proteolytic enzymes) was recommended for non-toxic raw materials for obtaining the biologically valuable protein-mineral, protein and mineral feed additives. The method of combined hydrolysis (enzymatic in combination with thermal) allows the use of raw materials, characterized as biotoxic, with the aim of obtaining the safe protein and mineral feed additives. Technological parameters of the enzymatic (type and activity of the enzyme preparation, temperature, duration of hydrolysis and pH of the medium) and thermal (temperature, duration, pressure) hydrolysis methods are scientifically substantiated. Developed methods for the production of feed additives from starfish of the Sea of Japan provide feed additives that differ in chemical composition and purpose.
Ключевые слова:
biological value; enzymatic; feed additives; hydrolysis; safety; starfish; technology; thermal


Заказать публикацию № 20

Номер заказа № 20

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#21Сентябрь 2018 выход журнала
Набор в журнал до 10-08-2017
162500 руб4 чел. (авторов) в этой статье

Соавтор1234
проданопроданопроданопродано
Рубли49400435503835032500
№ 21.1№ 21.2№ 21.3№ 21.4
ДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
Development of laboratory techniques for assessment of operating properties of intumescent fireproofing coatings
1 место - продано (договор 211)
2 место - продано (договор 212)
3 место - продано (договор 213)
4 место - продано (договор 214)

Дополнительно по статье:
adhesion of a charred layer to the surface of constructions and materials is one of the main components of fire protective efficiency of intumescent charring compositions, especially for metal surfaces. The paper overviews literature sources concerning the investigation of adhesive-cohesive properties of charred layers. It is shown that there are no easily performable methods for assessment of these properties. The laboratory device based on the back strike method has been developed. Adhesive-cohesive properties of charred layers modified with carbon additives were assessed using back strike method and pushing method. It is shown that these methods provide equal results.
Ключевые слова:
adhesive-cohesive properties of charred layers; back strike method; methods of evaluation of performance properties; operational property; pushing method; safety


Заказать публикацию № 21

Номер заказа № 21

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#22Октябрь 2018 выход журнала
Набор в журнал до 20-09-2017
130000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли526504355035100
№ 22.1№ 22.2№ 22.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
The formation of heterogeneous wear-resistant coatings by the additive technology method
1 место - продано (договор 221)
2 место - продано (договор 222)
3 место - продано (договор 223)

Дополнительно по статье:
The microstructure, hardness property and wear resistance coatings of WC, Ni-Cr and Fe powders deposited by laser cladding at varying processing parameters were investigated. The results of the present study revealed the prospects of multilayer cladding of R6M5 high-speed tool steel (analogy of M2 steel) onto low-alloy steel with the use of a laser beam. Controlling thermal cycles of laser cladding, it is possible to obtain a clad coating made of high-speed steel having the structure of high-alloy austenite martensite mixture with disperse inclusions of carbides up to 10 mm thick, i.e., it is actually possible to create bimetal structures. The wear resistance of the laser-clad self-fluxing PG-10N-01 (Ni-Cr-B-Si-C) alloy increases by a factor of 5 due to additional hardening by cast tungsten carbide with spherical particles. As a result, it becomes higher than the wear resistance of high-speed steel by more than a factor of 3.


Заказать публикацию № 22

Номер заказа № 22

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#23Апрель 2019 выход журнала
Набор в журнал до 10-05-2018
162500 руб7 чел. (авторов) в этой статье

Соавтор1234567
проданопроданопроданопроданопроданопроданопродано
Рубли29250273002535023400214501950017550
№ 23.1№ 23.2№ 23.3№ 23.4№ 23.5№ 23.6№ 23.7
ДоговорДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
Efficient heat-insulating material based on technogenic anhydrite
1 место - продано (договор 231)
2 место - продано (договор 232)
3 место - продано (договор 233)
4 место - продано (договор 234)
5 место - продано (договор 235)
6 место - продано (договор 236)
7 место - продано (договор 237)

Дополнительно по статье:
Physical and mechanical properties of the heat-insulating composition based on high-strength anhydrite binder with expanded perlite sand as a lightweight aggregate have been studied. The study has evaluated the influence of two poring components, air-entraining additives and aluminum powder suspension, on the main characteristics of the composition: the compressive strength of the sample, its average density, thermal conductivity, and water absorption. The studies have shown that adding an air-entraining agent in an amount of 1.2% by the weight of dry fluoroanhydrite significantly influenced the decrease in the average density (up to 37%) of the material. The developed composition with a lightweight aggregate based on expanded perlite sand and an air-entraining additive can be used in construction as an efficient heat-insulating material, including for filling cavity walls during frame construction.


Заказать публикацию № 23

Номер заказа № 23

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#24Май 2019 выход журнала
Набор в журнал до 05-06-2018
162500 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли650005460043550
№ 24.1№ 24.2№ 24.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
Influence of carbon-containing additives on sintering of limestone-nepheline furnace charge in alumina production
1 место - продано (договор 241)
2 место - продано (договор 242)
3 место - продано (договор 243)

Дополнительно по статье:
The article is devoted to the influence of brown coal additives on the sintering of the lime-nepheline charge in the technology of alumina production from nepheline. It is shown that carbon-containing materials added to the limestone-nepheline charge intensify sintering, and thus, contribute to a more uniform heat distribution along the furnace, improve the passage of the sintered material in the chain curtains, accelerate interaction of the charge components and increase recovery of alumina from the sintered mass. The mechanism of influence of coal during its combustion on the passage of solid-phase reactions in the charge is studied. Fossil brown coals with a high content of volatile substances and carbon graphite materials were used as coal additives.


Заказать публикацию № 24

Номер заказа № 24

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#25Сентябрь 2018 выход журнала
Набор в журнал до 05-08-2017
97500 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли201501885017550156001430013000
№ 25.1№ 25.2№ 25.3№ 25.4№ 25.5№ 25.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
Study of the effect of the synthetic additive Monnol Elite 5W-40 SL/CF on the quality indicators of mineral motor oil M-10G2k
1 место - продано (договор 251)
2 место - продано (договор 252)
3 место - продано (договор 253)
4 место - продано (договор 254)
5 место - продано (договор 255)
6 место - продано (договор 256)

Дополнительно по статье:
The results of a study of mixtures of mineral motor oil M-10G2k with 5% by weight of synthetic oil Monnol Elite 5W-40 SL/CF are presented. The effect of a synthetic additive on the optical properties, volatility, and coefficient of thermo-oxidative stability is established when testing a mixture in the temperature range from 180 to 160 0C.


Заказать публикацию № 25

Номер заказа № 25

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#26Июль 2019 выход журнала
Набор в журнал до 20-08-2018
97500 руб6 чел. (авторов) в этой статье

Соавтор123456
проданопроданопроданопроданопроданопродано
Рубли201501885017550156001430013000
№ 26.1№ 26.2№ 26.3№ 26.4№ 26.5№ 26.6
ДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
Analysis of the mechanism of action and functional properties of viscous additives
1 место - продано (договор 261)
2 место - продано (договор 262)
3 место - продано (договор 263)
4 место - продано (договор 264)
5 место - продано (договор 265)
6 место - продано (договор 266)

Дополнительно по статье:
In this paper, the mechanism of action of viscous additives based on polymer components is analyzed. The functional properties of the most common viscosity additives on the domestic market were tested: Kerry, LIQUI MOLY Visco-Stabil and Hi-Gear on oils of various basic bases, namely: Visco2000 15w40 mineral motor oil; semi-synthetic engine oil Genesis Lukoil 10w40; synthetic oil Lukoil Lux 5w40. The effectiveness of the additive Kerry in relation to the semi-synthetic engine oil Genesis Lukoil 10w40 has been revealed.


Заказать публикацию № 26

Номер заказа № 26

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#27Январь 2019 выход журнала
Набор в журнал до 20-02-2018
97500 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли390003250026000
№ 27.1№ 27.2№ 27.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 4;
CiteScore: 0,8;
Percentile 18;
Sjr: 0,21;

Специализация журнала:
Physics and Astronomy (all);

В статье рассмотрены такие вопросы:
Method for monitoring evaluation of dominant influence processes of oxidation and temperature destruction on basic indications of bodies of motor oils
1 место - продано (договор 271)
2 место - продано (договор 272)
3 место - продано (договор 273)

Дополнительно по статье:
The When the internal combustion engine is operated on friction surfaces, the processes of oxidation, temperature destruction and chemical reactions of metals with their products and additives proceed simultaneously. However, the dominant influence of one of the processes on the physico-chemical and anti-wear properties of oils has not been adequately studied. Therefore, the purpose of the present studies is to search for a new criterion that takes into account the optical properties of thermostated oil, viscosity index and antiwear properties. The experimental results of the empirical test of the thermooxidative stability of motor oils of various base bases, determined by the ratio of the product of optical density to the decimal logarithm of the viscosity index to the arithmetic mean of the wear spot diameter, are presented. It has been established that the base base of engine oils and test temperature has a different effect on the empirical criterion of thermooxidative stability.


Заказать публикацию № 27

Номер заказа № 27

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#28Сентябрь 2018 выход журнала
Набор в журнал до 10-08-2017
130000 руб3 чел. (авторов) в этой статье

Соавтор123
проданопроданопродано
Рубли526504355035100
№ 28.1№ 28.2№ 28.3
ДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1,1;
Percentile 35; 20;
Sjr: 0,249;

Специализация журнала:
Engineering (all); Materials Science (all);

В статье рассмотрены такие вопросы:
Control of geometrical parameters of a single layer at additive forming of products by FDM technology
1 место - продано (договор 281)
2 место - продано (договор 282)
3 место - продано (договор 283)

Дополнительно по статье:
Questions are considered about the accuracy of the formation of the surface layer by additive methods. The analysis of works is carried out on a research subject. High values of the error of forming (approximation) are revealed at forming of surfaces of a complex profile by additive methods. The spatial orientation of a single layer is proposed to reduce the error of forming products by additive methods . Mathematical dependences are proposed to determine the value of the parameters of a single directed layer on the results of experimental studies.


Заказать публикацию № 28

Номер заказа № 28

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#29Июль 2019 выход журнала
Набор в журнал до 15-08-2018
162500 руб5 чел. (авторов) в этой статье

Соавтор12345
проданопроданопроданопроданопродано
Рубли4030036400325002925025350
№ 29.1№ 29.2№ 29.3№ 29.4№ 29.5
ДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 0,8;
Percentile 25; 21; 19;
Sjr: 0,237;

Специализация журнала:
Earth and Planetary Sciences (all); Energy (all); Environmental Science (all);

В статье рассмотрены такие вопросы:
Research on the basis of foam glass substrates with additions of copper compounds
1 место - продано (договор 291)
2 место - продано (договор 292)
3 место - продано (договор 293)
4 место - продано (договор 294)
5 место - продано (договор 295)

Дополнительно по статье:
Obtained artificial substrates, representing a porous glass (foam glass) with additives of 3 to 10% of the mass. copper ions. Glass raw materials were used as raw materials for the synthesis of substrates. In order to create open porosity, a carbonate blowing agent (chalk) was introduced into the initial mixture. Foaming additive served as sodium nitrate, a source of copper ions -copper sulfate (copper sulfate). A distinctive feature of the synthesis method was the combination of wetting the initial mixture and its rapid heating to maximum temperature. This mode was used to increase the porosity of the resulting structure. It was found that the water absorption of the obtained substrates increases with an increase in the concentration of copper ions in them. The resulting materials, due to the increased content of copper ions in them, may have a fungicidal effect. Perhaps their use in crop production, landscape design, the construction industry in conditions of high humidity.


Заказать публикацию № 29

Номер заказа № 29

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

#30Май 2019 выход журнала
Набор в журнал до 15-06-2018
97500 руб7 чел. (авторов) в этой статье

Соавтор1234567
проданопроданопроданопроданопроданопроданопродано
Рубли17550169001560014300130001170011050
№ 30.1№ 30.2№ 30.3№ 30.4№ 30.5№ 30.6№ 30.7
ДоговорДоговорДоговорДоговорДоговорДоговорДоговор

Купить место в похожей теме

Название журнала доступно только клиентам, которые оплатили
Scopus
Q 3; 4;
CiteScore: 1;
Percentile 27; 22; 20; 13;
Sjr: 0,201;

Специализация журнала:
Engineering (all); Applied Mathematics; Computational Mathematics; Atomic and Molecular Physics, and Optics;

В статье рассмотрены такие вопросы:
Effects of organic impurities on the photooxidation of Chicago Sky Blue 6B diazo dye in nitrate solutions
1 место - продано (договор 301)
2 место - продано (договор 302)
3 место - продано (договор 303)
4 место - продано (договор 304)
5 место - продано (договор 305)
6 место - продано (договор 306)
7 место - продано (договор 307)

Дополнительно по статье:
The effects of polyvinylpyrrolidone, zinc nitrate, and cadmium nitrate on the spectral properties of Chicago Sky Blue 6B diazo dye in aqueous solutions and the variations of those properties under ultraviolet irradiation were studied. It was investigated how the photochemical oxidation of the dye is affected by polyvinylpyrrolidone, zinc nitrate, and cadmium nitrate additives in aqueous solutions. It was observed that in the presence of polyvinylpyrrolidone, the rate of photooxidation of the dye is significantly reduced.


Заказать публикацию № 30

Номер заказа № 30

Самый быстрый и простой способ заказать или задать вопрос, написать нам: Все контакты

Перейти № 31-60